Garage Door Garage Door Sensor Installation in Texas
Photo-eye safety sensors are required by UL-325 on every garage door opener manufactured since 1993. They detect obstructions in the door's path and either reverse the door (during close) or refuse to start (when activated). When sensors are misaligned, dirty, sun-blinded, or failed, the door either refuses to close at all or — worse — closes without sensing an obstruction. Our sensor installation service replaces failed sensors, realigns drifted brackets, cleans the eye optics, and verifies auto-reverse on a real obstruction test.
Replacement eyes are brand-specific (LiftMaster has a different connector and signal pattern than Genie). We stock the major brands and most legacy models. Brackets occasionally need replacement when corrosion has degraded them or impact has bent them. Bracket alignment is critical — eyes that are slightly off-aim trigger intermittent close failures that drive homeowners crazy.
Every visit ends with an obstruction test: a 1.5-inch (3.8 cm) tall object placed under the door at three positions across the opening. The door must reverse when it touches the object. This is the UL-325 baseline — if the door doesn't pass, the install isn't complete. We document the test results on the work order.
Signs you need garage door sensor installation
Door refuses to close from remote
Misaligned or dirty photo-eyes prevent close. The opener's status light usually blinks 10 times to indicate the photo-eye fault.
Door closes part-way then reverses
Photo-eyes detecting a phantom obstruction (often sun glare or insects). Realignment or shielding usually fixes.
Status light blinks 10 times
Universal LiftMaster code for photo-eye fault. Genie and Chamberlain have similar fault patterns.
Sensors visibly knocked out of alignment
Bumped brackets, lawn-equipment impacts, or vehicle contact all knock sensors out of aim. Realignment is a quick fix.
Older opener with no sensors
Pre-1993 openers don't have photo-eyes. Retrofit is possible on most models — and brings the door to current safety code.
Common causes & what we fix
Bracket misalignment
Brackets shift slightly from temperature cycling, vibration, or contact. Even a few degrees off-aim breaks the sensor beam.
Lens dirt or insects
Dust, spider webs, and insect carcasses block the infrared beam. Cleaning the lens often restores function.
Sun glare interference
Direct sunlight hitting the receiver lens can saturate the sensor and trigger false obstruction. Shielding or repositioning fixes.
Wire damage
Mice chew sensor wires; landscapers occasionally cut them. Replacement and re-routing fixes.
Sensor end-of-life
Photo-eye electronics fail at 10–15 years. Replacement is inexpensive and quick.
Our process
- Call or schedule online. Request garage door sensor installation in Texas and choose a 2-hour arrival window. A confirmation with your technician's name and photo lands in under five minutes.
- On-site diagnosis. In Texas, the garage door sensor installation starts with a hands-on diagnosis: free for most repairs, $39 on minor service calls (waived on approval). You see the issue and the fix first.
- Flat-rate quote. You get a flat-rate garage door sensor installation quote in writing before any work begins — no hourly creep, no upsell pressure, because our techs are salaried, not commissioned.
- Same-visit fix. Same-visit completion is the norm for garage door sensor installation: 96% of calls are fixed first time. We run the door with you to verify, then tidy up everything we touched.
How much does garage door sensor installation cost in Texas?
Garage Door Sensor Installation the United States starts at from $99, with the full garage door sensor installation price written down and locked before we start — there's no hourly meter and nothing bolted on later. We take 10% off labor for seniors (65+) and military, and jobs over $1,500 qualify for 0% APR Synchrony financing for 12 months, approved fast with no prepayment penalty.
Why homeowners in Texas choose us for garage door sensor installation
We've been a trusted choice since 1974 — over 50 years of family-owned garage door service across Texas. Our techs are CSLB-licensed (#1098234), background-checked, and complete an internal 12-week training program before rolling on calls alone.
Every garage door sensor installation is guaranteed: a 10-year workmanship warranty, held separate from the manufacturer's coverage on the parts. Should our garage door sensor installation fail because of the install, we return and correct it at no charge for ten full years. 30,000-cycle springs are warrantied for the life of the original homeowner; other parts and accessories carry standard 1–5 year terms.
We keep garage door sensor installation honest two ways — honest sizing and honest scope. There's no up-sell because the techs are salaried, not commissioned, and the diagnostic shows you precisely what we see, parts in good shape included. Repair or replace, we recommend whichever wins long-term, and the garage door sensor installation quote is flat-rate, written, and valid 30 days.
Areas we serve for garage door sensor installation
We provide garage door sensor installation throughout Texas, with fast coverage in every major Texas metro.
Reach times for garage door sensor installation in Texas vary by traffic and time of day; we'll quote an accurate ETA when you call. Our dispatch line routes straight to an on-call technician — no voicemail between you and the person solving the problem.
Frequently asked about garage door sensor installation
Top questions homeowners searching for Garage Door Sensor Installation near me ask us: